OIL/Water TANK MAIN MACHINES | ||
|---|---|---|
1. CNC PLASMA&FLAME CUTTING MACHINE | ||
FEATURES |      Product picture are for reference only | |
1.The plasma cutting machine is used to cut the carbon steel, the stainless steel and the non-ferrous metal sheets. | ||
2.The flame cutting is a traditional for cutting the carbon steel sheets in the hot way. | ||
3.The thickness of the steel sheets can be from 0.5mm to 100mm. | ||
4. Featuring in high speed and good cutting quality, which is an ideal choice for high quality cutting. | ||
TECHNICAL SPECIFICATIONS | ||
Track Gauge | 4000mm | |
Effective Cutting Width | 3000mm | |
Length of Leading Rail | 18000mm | |
Effective Cutting Length | 15000mm | |
Thickness of the Steel Sheet for Cutting | 0.5-100mm （Flame） | |
0.5-20mm （Plasma） | ||
Cutting Speed | 50-750mm/min(Flame) | |
50-4000mm/min(plasma) | ||
Maximum Returning Speed （of the bear machine ） | 12000mm/min | |
Accuracy when Repeated | ±0.5mm/1m | |
Voltage | AC220V±10% and AC380V± 10% | |
Frequency | 50Hz | |
The Total Power Supply | 25kW | |
PATENT NO. | Vist2024001 | |
201800910v | ||
APPROVAL STATUS: | ISO9001:2000 / 3C | |
N.W./G.W. | 6000kgs or so | |
Machine price | please send Inquiry | |
Configuration | [with power supply:Hyspeed plasma Maxpro200; Cutting torch:.plasma torch （1set）; Flame torch (1 set) ; CNC system:Micro EDGE （3 axes)]; | |
2. Automatic Flat Butt Welding Machine | ||
FEATURES | ||
①To ensure that the steel is flat,one-Side is Welded; Two Sides are Shaped. | ||
②The width of the welding seam is 5-12mm | ||
③There are clean and beautiful seam on both sides, round and smooth transfers. | ||
④ Ensure within 30 mm near the weld seam and the weld seam without oil, burr, rust and other defects. | ||
⑤ The gap between two plates less than 1mm; | ||
⑥ Must add arc starting and arc stopping plate. | ||
TECHNICAL SPECIFICATIONS |      Product picture are for reference only | |
Welding Length(can be customized) | 12000mm | |
Welding palte material | Q235A, Stainless steel | |
Thickness of workpiece | 3-8mm(need make groove when the thickness is more than 6mm) 6mm | |
Welding process | MIG | |
Effect of the Welding Seam | One-Side is Welded; Two Sides are Shaped. Back weld reinforcement ≤1.5mm | |
Way of Pressing the Work Piece | The Cylinder Keyboard Pressed | |
Welding Speed | 50-500mm/min | |
Welding power source | Miller 602 | |
Molding groove material | Red copper | |
Molding groove cooling type | Water-cooling(cooling water should use antifreeze) | |
Walking speed (empty) | Infinitely variable speeds(The adjusting range is 0 to 4000 mm/min) | |
Weld adjusting | Manual fine-tuning | |
Welding Gun Cooling Mode | Water-cooling | |
Welding torch quantity | 1 set | |
Positioning device | 4 sets | |
Feeder advice | 4 sets | |
Feeding device(With steel universal sphere) | 2000*12000mm | |
Discharginge(With normal Rubber wheel) | 1500*12000mm | |
Worktable height | 570mm | |
Power voltage | AC380 50HZ | |
Power | 30KW, 80A | |
Boundary dimension | 13700mm×1600mm×1800mm | |
Weight | 15T | |
NO. | NAME | BRAND |
1 | PLC | Mitsubishi |
2 | A.C. contactor | Schneider |
3 | Movement cable | Igus |
4 | Button | Schneider |
5 | Relay | Omron |
6 | Circuit breaker | Schneider |
7 | Switching power supply | Omron |
N.W./G.W. | 15000kgs or so | |
Price | Please send the inquiry | |
2. Board Turning Over Machine | ||
FEATURES |    Product picture are for reference only | |
① This machine is developed by our company for the irregular shape tank pressure container manufacturing. | ||
② It is an ideal selection for the customers and is mainly used in the procedure of the board turning-over after welding with the combination of the flat butt welding machine. | ||
③ It can solve the digging cave phenomenon and improve the safety and efficiency. | ||
④ The hydraulic mode can compact both sides of the workpiece and can turn over the workpiece within 180 degrees. | ||
⑤ It is convenient to operate and easy to control. | ||
TECHNICAL SPECIFICATIONS | ||
Names | Board Turning-Over Machine | |
Turning-Over Drive Mode | Hydraulic Drive | |
Turning Angle | 180° | |
Single Side Turning Angle | 0-100° | |
Applicable Dimension | Thickness:≤8mm | |
Length:8500mm | ||
Width:12000mm | ||
Material | Carbon steel | |
Voltage | 380V 50HZ | |
Power | 18KW, 40A | |
Delivery Mode | The Eclectic Motor | |
NO. | NAME | BRAND |
1 | PLC | Siemens |
2 | A.C. contactor | Schneider |
3 | Movement cable | Igus |
4 | Button | Schneider |
5 | Relay | Omron |
6 | Circuit breaker | Schneider |
N.W./G.W. | 12000Kg | |
PRICE | Please send inquiry to our email | |
QUANTITY | 1 SET | |
4. Oil Tank Rolling Machine | ||
FEATURES |       Product picture are for reference only | |
① This machine can be applied to the tank manufacture assembly line. | ||
② It adopts the advanced PLC program input technology, the micro electronics technology, and is shaped by one-time. | ||
③Suitable for workpiece which has uniform cross sections, Its brakearm has two joints, adopts hydraulic device mode. | ||
④ It rolls the sheet material according to the shape of the partition bulkhead or the dished head. During the rolling process, manual welding in the tank is needed to join the sheet material and the partition bulkhead. | ||
⑤ It has not only enhanced the efficiency but also has guaranteed the stable quality in the process of mass production. | ||
TECHNICAL SPECIFICATIONS | ||
Diameter | The Max diameter is: 2800mm The Min diameter is: 1200mm | |
The Max Length of Workpiece | 12000mm | |
Braking method | Hydraulic Brake | |
The Working Pressure of the Hydraulic System | 15MPa | |
The Height of the Work Table | 570mm | |
The Min R Radian | 350mm | |
The Material of the Workpiece | Carbon Steel | |
The Thickness of the Workpiece | 4-8mm | |
The Pressing Method | Hydraulic Mode | |
The Moving Way of the Pressing Beam | Power-driven | |
The Input Voltage | Customized Voltage 50HZ/60HZ | |
Total Power | 20KW, 40A | |
Overall dimensions | 17500mm×10500mm×6600mm | |
Weight | 31T more or less | |
Remark: This machine is suitable for general oil tank with bulkheads. | ||
It is not for cement tank(V-shape tank), LPG or LNG tank, normally used for fuel tank, oil tank(cross-section shape: round shape, ellipse shape, double D shape). Pls note: this tank rolling machine can only rolling uniform section tank. If your tank is variable cross-section, pls rolling the tank in sections. | ||
NO. | NAME | BRAND |
1 | PLC | Mitsubishi |
2 | A.C. contactor | Schneider |
3 | Movement cable | Igus |
4 | Button | Schneider |
5 | Motor(Hydraulic station) (18.5 KW) | Siemens |
6 | Hydraulic station（16KPa） | Vistmac |
7 | Valve(Hydraulic station) | Lixin |
8 | Touch screen | Delta |
9 | Relay | Omron |
10 | Circuit breaker | Schneider |
11 | Hydraulic pump joint | Eaton |
PRICE | Please send inquiry to our email | |
QUANTITY | 1 SET | |
5. Oil Tank Roller | ||
TECHNICAL PARAMETER: | ||
Model | VIS-01 |    Photos are for reference only |
Workpiece material | Carbon steel | |
Max Workpiece | 1800mm-2600mm | |
Min Workpiece | 1200mm-2000mm | |
The Min R Radian | 350mm | |
Applicable Scope | Round, Eight Center, Ellipse | |
Roller Diameter | 300mm(polyurethane) | |
Roller Width | 300mm | |
Horizontal adjustment | Lead screw adjusting | |
Roller Linear Speed | 100-1400mm/min | |
Walking wheel center distance | 1700mm | |
Rail specifications | 18kg/m | |
Load Capacity | 5T | |
Power Supply | AC380V 50HZ | |
Total Power | 4KW, 10A | |
The power cord length | 10m | |
Main electrical components | |||
No. | Name | Brand | Remarks |
1 | Frequency converter | Delta | Cell |
2 | Relay | Omron | Cell |
3 | Button switch | Schneider | Cell |
4 | Contactor | Schneider | Cell |
5 | Remote control | YuDing | Cell |
6 | Electrical control system | Vistmac | Cell |
7 | Moving cable | Igus | Cell |
N.W./G.W. | 2000kgs or so | ||
PRICE | Please send inquiry to us | ||
QUANTITY | 1 SET | ||
6. Automatic Welding Machine for Irregular Shaped Tank | ||
FEATURES |       | |
① Advanced computer controlling technology | ||
② PLC technology | ||
③ Micro-electronics and the frequency conversion technology | ||
④ The welding seams are good in appearance, high in welding quality and production efficiency, simple and convenient in operation, which has improved both the efficiency and quality. | ||
TECHNICAL SPECIFICATIONS | ||
Model | YSA-01 | |
Maximum Diameter | 2800mm | |
Minimum Diameter | 1200mm | |
The Min R Radian | 350mm | |
Gantry Gauge | 4400mm | |
Gantry Rail Length | 16000mm | |
Effective workpiece length | 12m | |
Material | Carbon steel | |
Thickess | 4-8mm | |
Welding Speed | 50-700mm/min | |
Gantry Longitudinal Returning Speed | 2800mm/min | |
Welding position | Flat position welding | |
Welding seam position | Tank girth eam welding | |
Welding Wire Diameter | 1.2mm | |
Welding manner | Mig | |
Gantry Drive | Servo drive | |
Rotating Device Drive | The AC Frequency Converter, the Stepless Speed Regulation | |
Cable Conveying | Drag chain | |
Welding Width | 5-12mm | |
Power source | Miller 602 | |
Power Supply | AC 380V 50HZ 3-phase 4-wire | |
Main Machine Power Supply | 40KW, 100A | |
No. | Name | Brand |
1 | Power source | Miller 602 |
2 | PLC | Mitsubishi |
3 | AC Frequency | Delta |
4 | Servo motor | Panasonic |
5 | Button | Schneider |
6 | Contactor | Schneider |
7 | Breaker | Schneider |
8 | Relay | Omron |
N.W./G.W. | 5000kgs or so | |
PRICE | please send inquiry | |
QUANTITY | 1 SET | |
7. Tank Rotator | ||
FEATURES |     Product picture are for reference only | |
① This machine can be applied to the tank manufacture assembly line. | ||
② It adopts the advanced PLC program input technology, the micro electronics technology. | ||
③ Suitable for both workpiece which has uniform cross sections and workpiece which has variable cross sections. | ||
④ it has not only enhanced the efficiency but also has guaranteed the stable quality in the process of mass production. | ||
TECHNICAL SPECIFICATIONS | ||
Gauge | 1700mm | |
Height of Center | 2000mm | |
Walking Rail | 18kg | |
Rail Length | 16000mm(18kg/m) | |
Rotating Speed | 0.2-0.5 Round/Min | |
Controlling Mode | Frequency control of motor speed | |
Maximum Capacity | 5 Ton | |
Drive Mode | One side drive | |
Longitudinal Working Mode | Manual | |
Total Power | 4KW,18A | |
Power Cord length | 10m | |
Power Source | AC380V 50HZ | |
Components | Relay:OMRON | |
Contactor:SCHNEIDER | ||
Button & Switch:SCHNEIDER | ||
Frequency converter :DELTA | ||
Motor:SIEMENS | ||
N.W./G.W. | 2000kgs or so | |
PRICE | Please send inquiry | |
QUANTITY | 1 SET | |
8. Hydraulic Dished Head Configuring Machine | ||
FEATURES | Product picture are for reference only      Need bulk carriers to ship the goods | |
①By using the common tools compacted with the module on the workpiece, the affusion is made to the module. | ||
②The pressure can help the realization of the configuration of the seal head. | ||
③The rubber seal belt is used to pressurize the workpiece. During the procedure, there is no need to change the module. Adjusting the size of the module according to your expected size will be all right. | ||
④The hydraulic system is hanged on the top. The platform on the top has a guiding slot, where the hydraulic pump can move freely to suit different sizes of the workpieces | ||
⑤The hydraulic plump has multiply purposes and convenient operation characteristics with powerful pressure. And its accessories can also be quite easy to purchase. | ||
TECHNICAL SPECIFICATIONS | ||
Model | BZ-2700 | |
Maximum Diameter | 2700mm(The max inner size of mould is 2700mm) | |
Minimum Diameter | 1200mm | |
Thickness of workpiece Q235A | 8mm | |
Thickness of workpiece 16Mn | 6mm | |
Thickness of workpiece SUS304 | 6mm | |
Thickness of workpiece Aluminium | 8mm | |
Dished end shape | Circle,ellipse ,irregular circle | |
Height of forming | ≤200mm(According to Diameter and thickness of workpiece) | |
Max Pressure of Working | About 1200T | |
Max Hydraulic system Working pressure | 27 Mpa | |
Cylinder NO. | 24 Sets | |
Way of forming | Hydraulic Mode | |
Hydraulic medium | Emulsion(cyclic utilization) | |
Sealing medium | Felt seal | |
Forming medium recovery mode | Air pressure type | |
Workpiece lifting mode | Hydraulic Mode | |
The maximum weight lifting workpiece | 1.5T | |
Upper mold | Offered by customer | |
Input Voltage | AC 380V 50Hz | |
Weight | About 28T | |
Machine Power | 28KW,90A | |
Main configuration | |||
No. | Name | Brand | Remarks |
1 | PLC | Mitsubishi | Cell |
2 | Motor | Siemens | Cast iron, insulation |
3 | Pressure gage | GUANSHAN | Cell |
4 | Hydraulic cylinder sealing | NOK | Cell |
5 | Cable | Igus | Cell |
6 | Hydraulic valve | LIXIN | Cell |
7 | Gear pump | China | Cell |
8 | Plunger pump | China | Cell |
9 | Hydraulic Hose | China | Cell |
PRICE | Please send inquiry | ||
QUANTITY | 1 SET | ||
No Template Irregular Dished Head Folding Machine | ||
FEATURES |      Product picture are for reference only | |
①Adopts the advanced PLC programme input technology and micro-electronics technology | ||
②Applicable for different kinds of pressure containers with easy operation, high efficiency and folding quality | ||
③Improve not only the collective manufacture with high and stable quality but also the working environments | ||
④The suitable objects: the automatic fixed distance gland edge folding of regular and irregular tanks, especially suitable for different kinds of shell tanks processing machines | ||
⑤The product has won the national patent, and has passed the CE certification. | ||
TECHNICAL SPECIFICATIONS | ||
Model | X-3000 | |
Maximum Diameter (mm) | 3000mm | |
Minimum Diameter (mm) | 1200mm | |
Minimum Circular Radius (mm) | ≥300mm | |
Folding Speed(Linear Velocity ) (mm/min) | 1000-2000mm/min | |
Power Supply | Ac 380V 50HZ | |
Upper pressure roller radian | R20 | |
Main Machine Power | 8KW, 30A | |
Control way | PLC | |
Applicable scope of sheet metal Material | Q235, stainless steel, Aluminium alloy | |
Applicable scope of sheet metal Thickness | 2-8mm | |
Applicable scope of sheet metal Spinning height | 25mm-50mm(According to thickness of workpiece; if the thickness is 2mm, the spinning height no more than 25mm) | |
Applicable scope of sheet metal Best suitable workpiece | Flat workpiece, round plump wokpiece | |
NO. | NAME | BRAND |
1 | PLC | Mitsubishi |
2 | A.C. contactor | Schneider |
3 | Movement cable | Igus |
4 | Button | Schneider |
5 | Relay | Omron |
6 | Circuit breaker | Schneider |
7 | Switching power supply | Omron |
N.W./G.W. | 1300kgs or so | |
PRICE | Please send inquiry | |
QUANTITY | 1 SET | |
PACKING: | Standard export packing | |
DELIVERY | Within 80 workdays after got deposit | |
PAYMENT | 50% DEPOSIT BY T/T; 50% BALANCE BY T/T BEFORE SHIPEMNT. | |
Installation and debugging | The the buyer will cover engineers airplane ticket, the accommodation, food costs, and USD150 per day per engineer for service charge. If translators needed, the charges covered by buyer. | |
VALIDITY | WITHIN ONE MONTH | |
